Omron FQ2-S4 - Page 474

Menu Tables
472
FQ2-S4 User’s Manual
Inspection
Details
(Shape search II)
Model parameter
Rotation Sets the angle range for the registered
model.
No (default), Yes Scene p. 151
Angle range −180 to 180 Scene p. 151
Model mode You can change to a mode that makes
it easier to search for images similar to
a model.
Fast (default), Stable Scene p. 151
Meas. Parameter
Extraction con-
dition
Scene p. 150
Candidate
level
Sets the detection target to only
objects with a correlation above the
specified candidate level.
0 to 100 (default: 60) Scene
Extraction X Results are output only for objects with
a measured X coordinate that is within
this range.
−999,999,999.9999 to
999,999,999.9999
Scene
Extraction Y Results are output only for objects with
a measured Y coordinate that is within
this range.
−999,999,999.9999 to
999,999,999.9999
Scene
Detection
count
Sets the maximum number of detec-
tion results to output.
1 to 32 Scene
Sorting method Sets the sort condition to use when
multiple measurement results meet
the extraction conditions..
Corr. ascending order, Corr. descending
order (default), Pos.X ascending order,
Pos.X descending order, Pos.Y ascend-
ing order, Pos.Y descending order
Scene p. 149
Output parameter
Reflect You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
No, Yes (default) Scene p. 150
Model parameter
Rotation Sets the angle range for the registered
model.
No (default), Yes Scene p. 158
Angle range −180 to 180 Scene p. 158
Sub-model num-
ber
You can change the number of divi-
sions of the registered model.
3 × 3, 5 × 5 (default), or 9 × 9 Scene p. 152
Plain inspection Enables or disables inspecting plain
sections.
Yes or No (default) Scene p. 152
Meas. Parameter
Sub-pixel You can increase the accuracy of
measurement positioning.
No (default), Yes Scene p. 157
Candidate level Sets the detection target to only
objects with a correlation above the
specified candidate level.
0 to 100 (default: 60) Scene p. 157
Output parameter
Reflect You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
No, Yes (default), Scene p. 157
(Edge widthEdge positionEdge pitch)
Meas. Parameter
Edge level Sets the color density level of the
edge.
0 to 100 (default: 50) Scene p. 164,
p. 175,
p. 171
Noise level Sets the color density level to treat as
noise.
0 to 442 (default: 5) Scene p. 165,
p. 175,
p. 171
Output parameter
Reflect You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
No, Yes (default), Scene p. 164,
p. 175,
p. 171
Menu command Description Setting range Data Refer-
ence