Menu Tables
FQ2-S4 User’s Manual
471
Appendices
12
Inspection
Details
(Search)
Model parameter
Rotation Sets the angle range for the registered
model.
No (default), Yes Scene p. 141
Angle range −180 to 180 Scene p. 141
Meas. Parameter
Sub-pixel You can increase the accuracy of
measurement positioning.
No (default), Yes Scene p. 139
Meas. Parameter
Extraction con-
dition
Scene
Candidate
level
Sets the detection target to only
objects with a correlation above the
specified candidate level.
0 to 100 (default: 60) Scene p. 140
Extraction X Results are output only for objects with
a measured X coordinate that is within
this range.
−999,999,999.9999 to
999,999,999.9999
Scene
Extraction Y Results are output only for objects with
a measured Y coordinate that is within
this range.
−999,999,999.9999 to
999,999,999.9999
Scene
Detection
count
Sets the maximum number of detec-
tion results to output.
1 to 32 Scene
Multi-point out-
put
Sets whether to output only the result
with the highest correlation, or to out-
put all results that meet the specified
extraction conditions.
OFF (default) or ON Scene p. 140
Sorting method Sets the sort condition to use when
multiple measurement results meet
the extraction conditions.
Corr. ascending order, Corr. descending
order (default), Pos.X ascending order,
Pos.X descending order, Pos.Y ascend-
ing order, Pos.Y descending order
Scene p. 139
Output parameter
Reflect You can specify whether to reflect the
ment results of an inspection item in
the overall judgement.
None, Yes (default) Scene p. 140
Menu command Description Setting range Data Refer-
ence
To Next Page
Loading...
