Omron FQ2-S4 - Page 488

Menu Tables
486
FQ2-S4 User’s Manual
Sensor settings
Data output
Link data output
Data output
period
Set the period for outputting measure-
ment results.
This parameter is displayed and can be
set only when [Handshake setting] is set
to [No].
This can be set only when the communi-
cations type is set to EtherNet/IP.
2 to 5,000 ms (default: 40 ms) System p. 337
GATE signal ON
period
Set the time to turn ON the GATE signal.
This parameter is displayed and can be
set only when [Handshake setting] is set
to [No].
This can be set only when the communi-
cations type is set to EtherNet/IP.
1 to 1,000 ms (default: 20 ms) System p. 337
Communication
mode
This parameter is displayed and can be
set only when [Comm. type] is set to
[PLClink (MELSEC)].
TCP server (default) or TCP client System
Initialize Initializes the Sensor settings and saved
data.
--- --- p. 277
Restart Restarts the Sensor. --- ---
Update Updates the Sensor system to the most
recent data.
--- --- p. 569
Menu command Description Setting range Data Refer-
ence