II
PREFACE
Thank you for purchasing an H8PS Cam Positioner.
The H8PS Cam Positioner is a compact and highly functional controller for detecting angles of rotation. Its
development has drawn on OMRON's advanced control technology and expertise in manufacturing
various types of controllers.
This Operation Manual describes how to use the H8PS Cam Positioners.
Before using the H8PS Cam Positioner, read this manual carefully so that you can use it correctly. Keep
the manual close at hand so that you can refer to it whenever necessary.
● Intended Audience
The Operation Manual is intended for the following readership.
• People in charge of introducing FA devices
• People who design FA systems
• People who install or connect FA devices
• People who manage working FA installations
Please note that persons who use this product must have sufficient knowledge of electrics.
Notice
(1) All rights reserved. No part of this manual may be reprinted or copied without the prior written
permission of OMRON.
(2) The specifications and other information in this manual are subject to change without notice for purposes
of improvement.
(3) Considerable care has been taken in the preparation of this manual; however, OMRON assumes no
responsibility or liability for any errors or inaccuracies that may appear. In the event that a problem is
discovered, please contact one of the Omron offices or agents listed at the end of the manual, and
provide the catalogue number shown on the cover of the manual.
To Next Page
Loading...
