Section 2 INSTALLATION
2-10
INSTALLATION
■ Surface Mounting (for all surface-mounting models)
* This dimension (*) differs depending on the DIN track type (74.4 is only for reference).
The illustration shows an 8-output model. With 16-/32-output models, the encoder cable is connected
at the bottom of the cam positioner unit.
115.2
±0.3
Four, M4 tap holes
81.8
±0.2
74.4 (*)
60.6
DIN Track
Surface Mounting Track Mounting
DIN Track Mounting Base
Y92F-91
(Order Separately)
16 16
To Next Page
Loading...
