5-23
OPERATION
Initial setting level
5-15 Specifying the Temperature Unit (K3MA-L)
5-15 Specifying the Temperature Unit
(K3MA-L)
This parameter allows you specify the temperature unit.
Procedure
A. When the product is at the operation level, press
the L key and hold it down for at least three
seconds to enter the initial setting level.
•"
5
" will appear on the level indicator, indicating
the product has entered the initial setting level.
B. Press the M key several times until parameter
"d-u" appears on the main indicator.
C. Press the S key to display the set value of the
parameter on the main indicator.
• The current set value for the temperature unit will
appear on the main indicator.
D. Press the S key again.
• The set value starts blinking, indicating the prod-
uct is in the change state.
E. Use the U key to change the set value.
F. Press the M key to go to the next parameter.
• The change is saved.
G. Press the L key and hold it down for at least
one second to return to the operation level.
Parameter Set value
Description
d-u
(D-U)
c
°C
f
°F
To Next Page
Loading...
Need help?
General
