5-33
OPERATION
Advanced-function setting level
5-23 Changing the Display Color
5-23 Changing the Display Color
This parameter allows you to change the display color of the main indicator.
Procedure
A. When the product is at the operation level, press
the L key and hold it down for at least three
seconds to enter the initial setting level.
•"
5
" will appear on the main indicator, indicating
the product has entered the initial setting level.
B. Enter password "K3MA-J or K3MA-F : -0169,
K3MA-L : -169" in parameter "amov" to enter
the advanced-function setting level. For details
on how to move to the advanced-function setting
level, refer to "5-2 Moving among Levels".
•"
f
" will appear on the level indicator, indicating the
product has entered the advanced-function setting level.
C. Press the M key several times until parameter
"color" appears on the main indicator.
D. Press the S key to display the set value of the
parameter on the main indicator.
• The current set value of changing the display
color will appear on the main indicator.
E. Press the S key again.
• The set value will start blinking, indicating the
product is in the change state.
F. Use the U key to change the set value.
G. Press the M key to go to the next parameter.
• The change is saved.
H. Press the L key and hold it down for at least
one second to return to the initial setting level.
I. Press the L key and hold it down for at least
one second to return to the operation level.
Parameter Set value
Description
color
(COLOR)
grn-r
Green-red: The display color is normally green, and
changes to red at comparative output ON.
grn
Green: The display color is always green.
red-g
Red-green: The display color is normally red, and
changes to green at comparative output ON.
red
Red: The display color is always red.
To Next Page
Loading...
Need help?
General
