Omron NT31

311
Fixed Displays
Section 7-4
[Display Functions]
The relationship between the properties of a text display element and the dis-
played graphic are indicated below.
S Properties
General
Description Displayed text
Alphanumerics and symbols, Marks
Position Coordinates of the top left corner of the rectangle that encloses
the text.
Font Type Font for alphanumerics
Standard/Half Height
Scale Scale at which the text is displayed (“Enlarged display”, page
311).
1
×
1 (Equal), 1
×
2 (High), 2
×
1 (Wide), 2
×
2, 3
×
3,
4
×
4, 8
×
8
Smoothing Whether or not smoothing is used for text with a scale of 2
×
2or
larger (“Smoothing”, page 312).
Check mark (smoothing executed)/
No check mark (smoothing not executed)
Attribute Display mode for the text (“Display attribute and drawing result”,
page 311).
Standard/Flash/Inverse Flash
Color
Foreground Display color of the text (colors other than black and white
featured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White/
Transparent
Background Background color of the text (colors other than black and white
featured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White/
Transparent
NT31C
Position
(Top left corner of the rectangle
enclosing the text)
Foreground color
(display color)
Background color
- Enlarged display
Character strings (text and marks) can be displayed at the following scales.
1
×
1 (Equal) 2
×
1 (Wide) 1
×
2 (High) 2
×
2
3
×
34
×
48
×
8