Omron NT31 User Manual

412
Alarm List, Alarm History
Section 7-11
[Display Functions]
S Alarm list
Apart from the “Common Attributes”, alarm lists have the properties indicated
below.
- Properties
Settings
List Settings
Start Bit Table
Entry
First bit memory table number of the bit memory tables used
for monitoring for the alarm list
Range: 0 to 1999
No.ofBits
Referenced
Number of bit memory tables used for monitoring for the
alarm list
Range: 1 to 1000
Bit memory tables
Bit memory table 24
Bit memory table 25
Bit memory table 26
Bit memory table 27
Bit memory table 28
Bit memory table 29
Bit memory table 30
Bit memory table 31
First bit memory table number: 25
Number of bit memory tables: 5
- Drawing result
An alarm list monitors host bits allocated to bit memory tables within the speci-
fied range in accordance with the bit memory table function property settings
and executes display in accordance with the “General” settings.
For details on the method of display according to the “General” settings, refer
to “Common Attributes” (page 410).
Alarm lists allow the screen to be switched in accordance with bit memory
table settings. For details, refer to 7-3-3 “Bit Memory Tables” (page 295).

Omron NT31 Specifications

General

Brand	Omron
Model	NT31
Category	Touch terminals
Language	English