Omron NT31 - Page 602

591
Commands/Responses
Section 9-3
9-3-17 Character string input notify command
(Sent from PT to host)
Command
[Format]
1B 53
[ESC] S
t3 d11
53
St1
d12t2
0D
t4
dn1 dn2
s1 s2 [CR]
** **** ** ** **
** ** ** **
t
1
to t
4
: Input character string memory table number (4 BCD digits)
0000 to 0499
This is the number of the character string memory table for which
there has been character string input.
d1
1
,d1
2
, ..., dn
1
,dn
2
:
Input character string data (1 to 40 characters)
00 to FF
H
In the case of character string memory tables allocated to the
host, this is the registered number of words multiplied by 2, and
the case of character string memory tables not allocated to the
host, it is data for 40 characters.
s
1
,s
2
: Check sum (2 hexadecimal digits)
This is always added.
Response
[Format]
None
[Function]
S In accordance with operations at the PT, such as character string settings and
copying of character string memory tables, notifies the host that a character
string has been input to the character string memory tables.
Example
S Command
0
1B 53
[ESC] S
31
4F
30
0
53
S2
3230
1
4F
0D4E 30 46
0
F [CR]
4D
52
OM
RON
Input character string memory table number : No.210
Input character string data (hexadecimal) : OMRON
Check sum (hexadecimal) : 0FH
Here, it is ascertained that “OMRON” has been input to character string memory
table No.210.