Omron NX Series - Page 17

15
Related Manuals
NX-series Data Reference Manual (W525)
Sysmac Studio Version
1 Operation Manual
W504 SYSMAC-
SE2
Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio
Describes the operating procedures of
the Sysmac Studio.
NX-IO Configurator
Operation Manual
W585 CXONE-AL
D-V4
Learning about the
operating proce-
dures and func-
tions of the NX-IO
Configurator.
Describes the operating procedures of
the NX-IO Configurator.
NX-series EtherCAT
Coupler Unit User’s
Manual
W519 NX-ECC20 Learning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals
The following items are described: the
overall system and configuration meth-
ods of an EtherCAT Slave Terminal
(which consists of an NX-series Ether-
CAT Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.
NX-series Ether-
Net/IP
TM
Coupler Unit
User’s Manual
W536 NX-EIC202 Learning how to
use an NX-series
EtherNet/IP Cou-
pler Unit and Eth-
erNet/IP Slave
Terminals
The following items are described: the
overall system and configuration meth-
ods of an EtherNet/IP Slave Terminal
(which consists of an NX-series Ether-
Net/IP Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units.
NX-series CPU Unit
Hardware User’s Man-
ual
W535 NX701- Learning the basic
specifications of
the NX-series
NX701 CPU Units,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NX701
CPU Unit system is provided along with
the following information on the CPU
Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
NX-series NX1P2 CPU
Unit Hardware User’s
Manual
W578 NX1P2- Learning the basic
specifications of
the NX-series
NX1P2 CPU Units,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance. Mainly
hardware informa-
tion is provided.
An introduction to the entire NX1P2
CPU Unit system is provided along with
the following information on the CPU
Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
Manual name Cat. No. Model numbers Application Description