Omron NX Series Reference Manual

Revision History
18
NX-series Data Reference Manual (W525)
Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
Revision code Date Revised content
01 April 2013 Original production
02 June 2013 • Added models on time stamp refreshing.
• Added Safety Control Units.
• Corrected mistakes.
03 September 2013 • Added new models and made changes accompanying the upgrade to
the unit version in September 2013.
• Corrected mistakes.
04 July 2014 Added new models in July 2014.
05 December 2014 Made changes accompanying the addition of the EtherNet/IP Coupler
Units.
06 April 2015 Added new models and made changes accompanying the upgrade to the
unit version in April 2015.
07 April 2016 • Made changes accompanying the addition of new models for Pulse Out-
put Unit of Position Interface Unit.
• Added Load Cell Input Unit.
• Corrected mistakes.
08 April 2016 Added Heater Burnout Detection Units.
09 July 2016 Added IO-Link Master Unit.
10 July 2016 Made changes accompanying the unit version upgrade of the EtherCAT
Coupler Unit NX-ECC203.
11 October 2016 • Made changes accompanying the addition of NY-series IPC Machine
Controller Industrial Panel PCs and Industrial Box PCs.
• Made changes accompanying the addition of the NX-series NX1P2 CPU
Unit.
• Corrected mistakes.
12 June 2017 • Made changes accompanying the upgrade of the NX-ECC203 unit ver-
sion to version 1.5.
• Made changes accompanying the upgrade of the NX-EIC202 unit ver-
sion to version 1.2.
• Corrected mistakes.
13 October 2017 Made changes accompanying the upgrade of the NX-ILM400 unit version
to version 1.1.
14 January 2018 Added Temperature Control Units.
Cat. No.
W525-E1-14
Revision code

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model