Omron NX Series Reference Manual

1 Data List
1 - 14
NX-series Data Reference Manual (W525)
 Items in the Summary Specifications
1-4-2 Digital Output Units
Transistor Output Units (Screwless Clamping Terminal Block, 12 mm
Width)
Item Description
Number of points The number of output points provided by the Unit.
Internal I/O common This is the polarity that the Unit uses to connect to output devices.
There are models with NPN and PNP connections.
Maximum load current The maximum output load current of the Unit. Specifications for each output point and for the Unit
are described.
Rated voltage The rated output voltage of the Unit.
I/O refreshing method The I/O refreshing methods that are used by the Unit.
Free-Run refreshing, synchronous I/O refreshing and output refreshing with specified time stamp
are available.
In the following table, the following abbreviations are used.
Free
: Free-Run refreshing
Sync
: Switching synchronous I/O refreshing and Free-Run refreshing
Specified time: Output refreshing with specified time stamp
ON/OFF response time The delay time for which data in the internal circuit is reflected in the state of output elements of the
Unit.
It is described according to the ON/OFF sequence.

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model