7
Manual Structure
NX-series Data Reference Manual (W525)
• In this manual, “download” refers to transferring data from the Support Software to a physical device
and “upload” refers to transferring data from a physical device to the Support Software.
• In this manual, the directions in relation to the Units are given in the following figure, which shows
upright installation.
• This user's manual refers to the NY-series IPC Machine Controller Industrial Panel PCs and Indus-
trial Box PCs as simply Industrial PCs or as NY-series Industrial PCs.
• This user's manual may omit manual names and manual numbers in places that refer to the user's
manuals for CPU Units and Industrial PCs. The following table gives some examples. When neces-
sary, refer to Related Manuals on page 14 to determine the appropriate manual based on the com-
mon text for the omitted contents.
Examples:
• This user's manual may omit manual names and manual numbers in places that refer to the user's
manuals for Communications Coupler Units. If you will use a Communications Coupler Unit, refer to
Related Manuals on page 14 to identify the manual for your Unit.
Precaution on Terminology
Manual name Omitted contents Common text
NJ/NX-series CPU Unit Software
User's Manual
Software user's manual for the con-
nected CPU Unit or Industrial PC
Software User's Manual
NY-series IPC Machine Controller
Industrial Panel PC / Industrial Box
PC Software User's Manual
NJ/NX-series Instructions Refer-
ence Manual
Instructions reference manual for
the connected CPU Unit or Indus-
trial PC
Instructions Reference Manual
NY-series Instructions Reference
Manual
RightLeft
Up
Down
To Next Page
Loading...
