Omron NX Series Reference Manual

Relevant Manuals
4
NX-series Data Reference Manual (W525)
Relevant Manuals
The table below provides the relevant manuals for the NX-series Communications Coupler Units and
NX Units.
Read all of the manuals that are relevant to your system configuration and application to make the most
of the NX-series Communications Coupler Units and NX Units.
Other manuals, such as related product manuals, are necessary for specific system configurations and
applications. Refer to Related Manuals on page 14 for the related manuals.
Manual name Application
NX-series Data Reference Manual Referencing lists of the data that is required to config-
ure systems with NX-series Units
NX-series NX1P2 CPU Unit Hardware User’s Manual Learning the basic specifications of the NX-series
NX1P2 CPU Units, including introductory information,
designing, installation, and maintenance. Mainly hard-
ware information is provided.
NX-series EtherCAT Coupler Unit User's Manual Leaning how to use an NX-series EtherCAT Coupler
Unit and EtherCAT Slave Terminals
NX-series EtherNet/IP
TM
Coupler Unit User's Manual
Learning how to use an NX-series EtherNet/IP Coupler
Unit and EtherNet/IP Slave Terminals.
NX-series Digital I/O Units User's Manual Learning how to use NX-series Digital I/O Units
NX-series Analog I/O Units User's Manual for Analog
Input Units and Analog Output Units
*1
*1. From revision 05 of this manual, information on the NX-series Temperature Input Units (NX-TS) that
were included in previous revisions was moved to the following manual: NX-series Analog I/O Units User's
Manual for Temperature Input Units and Heater Burnout Detection Units (Cat. No. W566). Accompanying that
change, the name of this manual was changed from the NX-series Analog I/O Units User's Manual (Cat. No.
W522) to the NX-series Analog I/O Units User's Manual for Analog Input Units and Analog Output Units (Cat.
No. W522).
Learning how to use NX-series Analog Input Units and
Analog Output Units
NX-series Analog I/O Units User's Manual for Tempera-
ture Input Units and Heater Burnout Detection Units
*2
*2. The NX-series Temperature Input Units (NX-TS) that were included in the NX-series Analog I/O Units
User's Manual (Cat No. W522) in revision 04 and earlier revisions were moved to this manual.
Learning how to use NX-series Temperature Input
Units and Heater Burnout Detection Units
NX-series System Units User's Manual Learning how to use NX-series System Units
NX-series Position Interface Units User's Manual Learning how to use NX-series Position Interface Units
NX-series Communications Interface Units User's Man-
ual
Learning how to use NX-series Communications Inter-
face Units
NX-series Safety Control Unit User's Manual Learning how to use NX-series Safety Control Units
NX-series Load Cell Input Unit User's Manual Learning how to use an NX-series Load Cell Input Unit
NX-series IO-Link Master Unit User's Manual Learning how to use an NX-series IO-Link Master Unit
NX-series Temperature Control Unit User's Manual Learning how to use an NX-series Temperature Control
Unit

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English