EasyManuals Logo

Omron NX Series Reference Manual

Omron NX Series
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
1 Data List
1 - 6
NX-series Data Reference Manual (W525)
1-3 Communications Coupler Units
This section describes the data for Communications Coupler Units. This section also gives the data for
the End Cover that is an Accessory for the Communications Coupler Unit.
Items in the Summary Specifications
Data List
1-3-1 EtherCAT Coupler Unit
Item Description
Unit power supply Rated voltage The rated voltage of the Unit power supply that is supplied to the Unit.
NX Unit power supply
capacity
The amount of power that the Unit can supply to the NX Units. The
power consumption of the Unit from the NX Unit power supply is not
included.
I/O power supply Rated voltage The rated voltage of the I/O power supply that is supplied to the Unit.
Maximum current of I/O
power supply
The maximum value of the current supplied from the I/O power supply
that the Unit can supply to the NX Units through the NX bus connec-
tors.
Model
Unit configuration data Summary specifications
NX Unit
power
con-
sump-
tion [W]
Current
consump-
tion from
I/O power
supply
[mA]
Weigh
t [g]
Width
[mm]
I/O
data
size
[byte]
Number of
I/O entry
mappings
Unit power supply I/O power supply
Rated
voltage
NX Unit
power
supply
capacity
*1
*1. The NX Unit power supply capacity and the maximum current of I/O power supply are sometimes restricted by conditions such as the
temperature or installation orientation. For details, refer to A-1 NX Unit Power Supply and I/O Power Supply Capacity on page A-2.
Rated
voltage
Maximum
current of
I/O power
supply
*1
NX-ECC201
1.45
10 170 46
34/0
2/0 24 VDC 10 W max.
5 to 24
VDC
4 A
NX-ECC202
10 A
NX-ECC203
1.25 18/0

Table of Contents

Other manuals for Omron NX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron NX Series and is the answer not in the manual?

Omron NX Series Specifications

General IconGeneral
Programming LanguagesLadder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication PortsEthernet, USB, RS-232C, RS-485
Memory CapacityVaries by model
Program MemoryVaries by model
Data MemoryVaries by model
Operating Temperature0°C to 55°C
Power Supply24 VDC
Ethernet Ports1 or 2 ports (depending on model)
USB Ports1 or 2 ports (depending on model)
DimensionsVaries by model
WeightVaries by model

Related product manuals