1
Introduction
NX-series Data Reference Manual (W525)
Introduction
Thank you for purchasing an NX-series.
This manual lists data that is required to configure systems, such as the power consumptions and
weights of the NX Units that configure CPU Rack or Slave Terminals.
Use this manual when considering the Unit configuration of CPU Rack or Slave Terminals on paper.
Keep this manual in a safe place where it will be available for reference during operation.
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.
This manual covers the following product.
•NX-series
NX1P2 CPU Unit
Communications Coupler Units
Digital I/O Units
Analog I/O Units
Position Interface Units
System Units
Safety Control Units
Communications Interface Units
Load Cell Input Unit
Heater Burnout Detection Units
IO-Link Master Unit
Temperature Control Units
Intended Audience
Applicable Products
To Next Page
Loading...
Need help?
General
