Omron NX Series Reference Manual

A - 27
Appendices
NX-series Data Reference Manual (W525)
A-5 Version Information with CPU Units
A
A-5-2 Support Functions of the CPU Units and Restrictions on the NX Units
 NX Unit Part 3
Function of CPU Unit
Models of NX Units and unit versions
Temperature Control Units
Restarting Restarting a specified NX Unit Ver.1.0
Monitoring total power-ON time Ver.1.0
Restarting after trans-
ferring Unit operation
settings
Restarting the NX Unit to which the
Unit operation settings were trans-
ferred when you transfer the settings
to a specified NX Unit
Ver.1.0

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model