Omron NX1P2 series User Manual

5 Installation and Wiring
5 - 32
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
5 Set the Battery-related error detection to Use and adjust the CPU Unit’s clock data to the cur-
rent time.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for how to make the
setting.
Precautions for Safe Use
• Never short-circuit the battery terminals; never charge the battery; never disassemble the
battery; and never heat or incinerate the battery. Doing any of these may cause the battery to
leak, heat, ignite, or rupture.
• Dispose of any battery that has been dropped on the floor or otherwise subjected to exces-
sive shock. Batteries that have been subjected to shock may leak if they are used.

Omron NX1P2 series Specifications

General

Model	NX1P2 Series
Manufacturer	Omron
Type	Controller
CPU Units	1
Program Capacity	5 MB
Data Memory Capacity	128 KB
Ethernet Ports	1
Serial Ports	1
Built-in EtherNet/IP Port	Yes
Built-in EtherCAT Port	Yes
Built-in USB Port	Yes
SD Memory Card Slot	Yes
USB Port	1
Power Supply Voltage	24 VDC
Programming Language	Ladder, Structured Text, Function Block Diagram
Communication Protocols	EtherNet/IP, EtherCAT, Serial (RS-232C)