Omron NX1P2 series User Manual

Versions
34
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
The functions that are supported depend on the unit version of the NX-series CPU Unit. The version of
Sysmac Studio that supports the functions that were added for an upgrade is also required to use those
functions.
Refer to A-3 Version Information on page A-6 for the relationship between the unit versions of the CPU
Units and the Sysmac Studio versions, and for the functions that are supported by each unit version.
Unit Versions of CPU Units and Sysmac Studio Versions

Omron NX1P2 series Specifications

General

Model	NX1P2 Series
Manufacturer	Omron
Type	Controller
CPU Units	1
Program Capacity	5 MB
Data Memory Capacity	128 KB
Ethernet Ports	1
Serial Ports	1
Built-in EtherNet/IP Port	Yes
Built-in EtherCAT Port	Yes
Built-in USB Port	Yes
SD Memory Card Slot	Yes
USB Port	1
Power Supply Voltage	24 VDC
Programming Language	Ladder, Structured Text, Function Block Diagram
Communication Protocols	EtherNet/IP, EtherCAT, Serial (RS-232C)