35
Related Manuals
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series NX1P2
CPU Unit Hardware
User’s Manual
W578 NX1P2- Learning the basic
specifications of
the NX-series
NX1P2 CPU Units,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NX1P2
CPU Unit system is provided along
with the following information on the
NX1P2 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU Unit
Built-in I/O and Option
Board User's Manual
W579 NX1P2- Learning about the
details of functions
only for an
NX-series NX1P2
CPU Unit and an
introduction of
functions for an
NJ/NX-series CPU
Unit.
Of the functions for an NX1P2 CPU
Unit, the following information is pro-
vided.
• Built-in I/O
• Serial Communication Option
Boards
• Analog I/O Option Boards
An introduction of following functions
for an NJ/NX-series CPU Unit is also
provided.
• Motion control functions
• EtherNet/IP communications func-
tions
• EtherCAT communications func-
tions
NJ/NX-series
CPU Unit Software
User’s Manual
W501 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning how to
program and set
up an
NJ/NX-series CPU
Unit.
Mainly software
information is pro-
vided.
The following information is provided
on a Controller built with an
NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC
61131-3 language specifications
NJ/NX-series
Instructions Reference
Manual
W502 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning detailed
specifications on
the basic instruc-
tions of an
NJ/NX-series CPU
Unit.
The instructions in the instruction set
(IEC 61131-3 specifications) are
described.
NJ/NX-series
CPU Unit Motion Con-
trol User’s Manual
W507 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning about
motion control set-
tings and program-
ming concepts.
The settings and operation of the CPU
Unit and programming concepts for
motion control are described.
To Next Page
Loading...
Need help?
General
