Omron NX1P2 series

6 Troubleshooting
6 - 22
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
10280000 hex Error in Exe-
cuting Auto-
matic
Transfer
The automatic
transfer ended in an
error.
• It was not possible to read the
data for automatic transfer.
• The SD Memory Card was
removed during an automatic
transfer.
• There are no backup files in the
autoload folder on the SD
Memory Card.
• The backup files in the autoload
folder on the SD Memory Card
are corrupted.
• The SD Memory Card is dam-
aged.
S page 6-67
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info