Omron R88D-KN series User Manual

Appendicies
A-120
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Event name Object Error Event code 14A90000 hex
Meaning The object area data in non-volatile memory is corrupted.
Source EtherCAT Master Function Module Source details Slave Detection
timing
When
establishing
communications
after turning ON
power to the
slave
Error attributes Level Minor fault Recovery Error reset (after
cycling slave
power)
Log category System
Effects User program Continues. Operation Power drive circuit is OFF for relevant slave.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Remedy Prevention
Noise Reset all of the objects. Implement
noise countermeasures.
Reset all of the objects. Implement
noise countermeasures.
Non-volatile memory failure If the error persists, replace the Servo
Drive.
None
Attached
information
None
Precautions/
Remarks
“36” is displayed on the Servo Drive front panel and F136 is given as the AlarmCode (4001 hex).
Event name Object Error Event code 14AA0000 hex
Meaning The object area data in non-volatile memory is corrupted.
Source EtherCAT Master Function Module Source details Slave Detection
timing
When
establishing
communications
after turning ON
power to the
slave
Error attributes Level Minor fault Recovery Error reset (after
cycling slave
power)
Log category System
Effects User program Continues. Operation Power drive circuit is OFF for relevant slave.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Remedy Prevention
Noise Reset all of the objects. Implement
noise countermeasures.
Reset all of the objects. Implement
noise countermeasures.
Non-volatile memory failure If the error persists, replace the Servo
Drive.
None
Attached
information
None
Precautions/
Remarks
“36” is displayed on the Servo Drive front panel and F236 is given as the AlarmCode (4001 hex).

Omron R88D-KN series Specifications

General

Brand	Omron
Model	R88D-KN series
Category	Controller
Language	English