EasyManuals Logo

Omron S8BA-24D24D120LF User Manual

Omron S8BA-24D24D120LF
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Safety precautions
S8BA-24D24D□□□LF
10
Caution
(for installation and connection)
Do not install the unit in other than specified orientations.
Dropping or toppling the unit may cause injury.
If you install the unit in an orientation other than specified, the internal temperature
may rise, eventually damaging the UPS or deteriorating the battery.
Do not use the unit where the maximum temperature exceeds 55°C.
The battery deteriorates rapidly.
If the battery's resin separator is damaged, the battery may be short-circuited
inside, and may cause an abnormal heating, smoke, rupture or fire.
Doing so may cause a failure or malfunction of the unit.
Do not exceed the ranges specified for environmental conditions during
use/storage.
Do not install or store the unit in the places listed below.
Do not store in places where the humidity is lower than 10% or higher than 90%.
Do not use the unit in places where the ambient temperature is lower than 0°C or
higher than 55°C. (With no condensation)
Do not use in places where the humidity is lower than 10% or higher than 90%.
Do not install/store the unit in closed places such as cabinets with no clearance,
places where there is flammable or corrosive gas, places with large amounts of
dust, places exposed to direct sunlight, places exposed to shock or vibration, salty
or wet places, or outdoors.
Installation or storing the unit in such a place may cause a fire.
When you use plug strip and other plugs to connect additional devices,
do not connect devices that exceed the current capacity of the available
plugs.
The current protection of the unit may operate, which may stop the output.
The cable heats up, which may cause a fire.
Do not pinch or sharply bend the cable.
Do not fold or knot the cable.
Doing so may cause the cable to be damaged or heated, which may cause an
electric shock or a fire.
If the cable is damaged, stop using the unit and have the cable repaired.
For repair, contact our sales personnel.
Do not connect any devices other than rated voltage is DC24V.
The rated output voltage of this unit is DC24V.
Overvoltage or overcurrent may damage the connected devices.
All of the included accessories are designed to be used with the unit. Do
not use the accessories with other devices.
Doing so may compromise the safety of devices.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron S8BA-24D24D120LF and is the answer not in the manual?

Omron S8BA-24D24D120LF Specifications

General IconGeneral
BrandOmron
ModelS8BA-24D24D120LF
CategoryUPS
LanguageEnglish

Related product manuals