Voltage and Current Inputs
Make sure that the voltages and currents that are input to the Units and slaves are within
the specified ranges.
Inputting voltages or currents that are outside of the specified ranges may cause acci-
dents or fire.
Transferring
Always confirm safety at the destination node before you transfer Unit configuration in-
formation, parameters, settings, or other data from tools such as the Sysmac Studio.
The devices or machines may operate unexpectedly, regardless of the operating mode
of the Controller
.
Safety Precautions
18
NX-series System Units User's Manual (W523)
To Next Page
Loading...
