Manual name Cat. No. Model numbers Application Description
NX-series
NX102 CPU Unit
Hardware
User’
s Manual
W593
NX102-££££
Learning the basic
specifications of
the NX102 CPU
Units, including in-
troductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NX102
system is provided along with the
following information on the CPU
Unit.
• Features and system configura-
tion
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU Unit
Hardware
User’
s Manual
W578
NX1P2-££££
Learning the basic
specifications of
the NX1P2 CPU
Units, including in-
troductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NX1P2
system is provided along with the
following information on the CPU
Unit.
• Features and system configura-
tion
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
EtherCAT
®
Coupler Unit
User’s Manual
W519
NX-ECC20£
Learning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals.
The following items are described:
the overall system and configuration
methods of an EtherCAT Slave Ter-
minal (which consists of an NX-ser-
ies EtherCAT Coupler Unit and NX
Units), and information on hard-
ware, setup, and functions to set up,
control, and monitor NX Units
through EtherCAT.
NX-series EtherNet/IP
™
Coupler Unit User’
s Man-
ual
W536 NX-EIC202 Learning how to
use an NX-series
EtherNet/IP Cou-
pler Unit and
EtherNet/IP Slave
Terminals.
The following items are described:
the overall system and configuration
methods of an EtherNet/IP Slave
Terminal (which consists of an NX-
series EtherNet/IP Coupler Unit and
NX Units), and information on hard-
ware, setup, and functions to set up,
control, and monitor NX Units.
NJ/NX-series
CPU Unit
Built-in EtherCAT
®
Port
User
’s Manual
W505
NX701-££££
NX502-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherCA
T port on
an NJ/NX-series
CPU Unit.
Information on the built-in EtherCAT
port is provided.
This manual provides an introduc-
tion and provides information on the
configuration, features, and setup.
NY-series
IPC Machine Controller
Industrial Panel PC
/ Industrial
Box PC
Built-in EtherCAT
®
Port
User
’s Manual
W562
NY532-££££
NY512-££££
Using the built-in
EtherCAT port in
an NY-series In-
dustrial PC.
Information on the built-in EtherCAT
port is provided.
This manual provides an introduc-
tion and provides information on the
configuration, features, and setup.
Related Manuals
34
NX-series System Units User's Manual (W523)
To Next Page
Loading...
