Omtech USB570y - Adjusting Reset Speeds; Adjusting the Machines Configuration; Adjusting Rotary Axis Parameters

33
4.4.21 Adjusting Reset Speeds
In the Para Setting submenu, select Speed Setting to display the following interface:
4.4.22 Adjusting the Machine’s Configuration
In the Para Setting submenu, select Machine Config to display the following interface:
4.4.23 Adjusting Rotary Axis Parameters
In the Para Setting submenu, select Rotate Function Setting to display the following interface:
Select and adjust the parameters by pushing the arrows. When you finish your adjustments, move the cursor to Write
and press ENT to save the parameter change or ESC to exit without saving. Read can load saved parameters.
Select and adjust the parameters by pushing the arrows. When you finish your adjustments, move the cursor to Write
and press ENT to save the parameter change or ESC to exit without saving. Read can load saved parameters.
Select and adjust the parameters by pushing the arrows. When you finish your adjustments, move the cursor to Write
and press ENT to save the parameter change or ESC to exit without saving. Read can load saved parameters.