Onicon D-100 - Default Chapter; Table of Contents

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • sales@onicon.com
D-100 Dual Network Interface Installation Guide 03/18 - 1015-2 / 35094 Page 3
TABLE OF CONTENTS
1.0 INTRODUCTION ..................................................................................................5
1.1 PURPOSE OF THIS GUIDE .......................................................................5
1.2 TYPICAL D-100 INSTALLATION .............................................................5
1.3 SPECIFICATIONS ......................................................................................5
1.4 PROTOCOL SELECTION ...........................................................................6
1.5 NETWORK SIGNAL CONNECTIONS .......................................................7
1.5.1 RS485 ...............................................................................................7
1.5.2 BACnet/IP UDP/IP and/or MODbus TCP/IP .................................. 8
1.5.3 Optional Network Interface with
Isolated Digital Pulse Input (Di3) ...................................................9
1.6 BACNET MS/TP BAUD RATE, BIASING AND TERMINATION ...........12
1.6.1 Baud Rate ......................................................................................12
1.6.2 Biasing and Termination...............................................................13
1.7 NETWORK ADDRESSING .......................................................................13
1.7.1 Changing the MAC (Device) Address ...........................................13
1.7.2 Changing the IP Address, Subnet mask & Gateway Address ......15
2.0 BACnet PICS and OBJECTS ...............................................................................16
2.1 PIC STATEMENT .....................................................................................16
2.2 BAC OBJECTS .......................................................................................... 18
2.3 ADDITIONAL BACNET OBJECT INFORMATION ................................. 19
2.4 ANALOG INPUT(S) .................................................................................20
2.5 ANALOG VALUE(S) ................................................................................21
2.6 BINARY VALUES(S) ................................................................................ 22
3.0 MODBUS MEMORY MAP ..................................................................................23
3.1 MODBUS Register Format and Networking Information .......................23
3.2 MODBUS Memory Map Table .................................................................24
3.3 Totalization, Resetting Totals, Over-range & Rollover ............................ 29
4.0 NETWORK TROUBLESHOOTING ....................................................................31
4.1 Troubleshooting .......................................................................................31
APPENDIX
A-1 D-100 Flow Display Computer Board
A-2 D-100 Dual Network Interface Board
A-3 D-100 Dual Network Interface Auxiliary Input Board