Onicon F-1000 SERIES - 1 Acquiring, Installing, and Updating the Configuration Utility; Acquiring the Configuration Utility; Installing the Configuration Utility

F
-
1000 SERIES TURBINE METER CONFIGURATION UTILITY AND INSTALLATION GUIDE
ONICON Incorporated 727.447.6140 Page 3 onicon.com
SECTION 1.0
ACQUIRING, INSTALLING, AND UPDATING THE CONFIGURATION UTILITY
1.2 INSTALLING THE
CONFIGURATION UTILITY
The ONICON Insertion Turbine Meter Conguration Utility was designed to
operate with the Windows XP, Windows 7, Windows 8, or Windows 10 operating
systems. The utility is available for download from ONICON’s website at
https://www.onicon.com/products/f1000-series-turbine-ow-meters.
Locate and open the folder which was downloaded. Within the folder, locate and
open the le named “TurbineMeter_Conguration_XXX_XXX_XXX.exe.” The
“XXX_XXX_XXX” in the le name will appear as numbers. The specic numbers
you see are based on the revision of the software provided by ONICON.
Once this .exe le is opened, please follow the on-screen prompts to complete
the installation of the program on your computer.
1. Click “Next” to continue the installation.
1.1 ACQUIRING THE
CONFIGURATION UTILITY
2. Accept the terms and click “Next” to accept the agreement.