Onicon F-1000 SERIES - 3 How to Use the Configuration Utility; Opening the Software; Connection, Status, and Mode Indicators; Connection Indicator

F
-
1000 SERIES TURBINE METER CONFIGURATION UTILITY AND INSTALLATION GUIDE
ONICON Incorporated 727.447.6140 Page 9 onicon.com
SECTION 3.0.
HOW TO USE THE CONFIGURATION UTILITY
3.1 OPENING THE SOFTWARE
First screen which appears after opening the Congurator
Open the “Smart Turbine Meter” software by double-clicking the logo on your
computer’s desktop or through the .exe located in the folder the program was
installed in earlier.
The “ONICON FLOW AND ENERGY MEASUREMENT” splash screen will appear
followed by the Conguration Utility opening on the Meter Data tab.
3.2 CONNECTION, STATUS, AND
MODE INDICATORS
Three indicators are available on the top portion of the congurator window.
Their color and text will change depending on the current operating status of the
meter.
A QR code is also available which will link your cellphone to ONICON’s website
3.2.1 CONNECTION INDICATOR
This indicator provides information about the current status of the hardware
connection to the turbine meter. Three variations exist.
“Connected” text with green background
This status is telling the user that the meter is connected and
there are no errors.
“Initializing” text with yellow background
This status appears when the USB cable is re-connected after
being disconnected. Once the initialization process ends,
either a “connected” or “missing” status will appear.