F
-
1000 SERIES TURBINE METER CONFIGURATION UTILITY AND INSTALLATION GUIDE
ONICON Incorporated 727.447.6140 Page 8 onicon.com
2.2 USB CABLE CONNECTION
TO THE INSERTION
TURBINE METER
The physical interface to the insertion turbine meter is a USB Micro Type B Jack.
Most computers feature one or more USB Type A Jacks. If your computer has
a USB Type A Jack, utilize an “A Male to Micro B Male” cable to connect to the
meter.
The maximum allowable USB cable length, before a powered hub or extender
would need to be utilized, is 5 meters, or 16 feet 5 inches.
The USB Micro connection is made at the female connector inside the meter’s
electronics enclosure.
A Male to Micro B Male USB Cable
WARNING
The micro USB connection inside the turbine meter enclosure can be easily
damaged if the cable is not plugged straight into the connector – such that
a moment force is applied to the connector. Please be sure the cable is only
pushed straight in or pulled straight out.
To Next Page
Loading...
