EasyManuals Logo

Onkyo HT-R380 Instruction Manual

Onkyo HT-R380
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
En
Connect your components to the appropriate jacks. The default input assignments are shown below.
: Assignment can be changed ( 29).
Refer to “About HDMI” ( 49) and “Using an RIHD-compatible TV, Player, or Recorder” ( 50).
Tip
To listen to audio received by the HDMI IN jacks through your TV’s speakers:
Set the “TV Controlsetting to “On” ( 34) for an p-compatible TV.
Set the “Audio TV OUT” setting to “On” ( 32) when the TV is not compatible with p or the “TV Control” setting to “Off”.
Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.
To listen to TV audio through the AV receiver, see “Connecting External Components” ( 15).
Note
When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV
screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to
another input source, this may result in no sound from the AV receiver or the sound may be cut off.
When the “Audio TV OUT” setting is set to “On” ( 32) to hear from your TV’s speakers, by controlling the AV receiver’s volume,
the sound will be output from the AV receiver’s speakers, too. When the
TV Control” setting is set to On ( 34) to hear from
speakers of p-compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers will produce sound while the
TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
Audio return channel (ARC) function
Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the
AV receiver. To use this function, you must select the TV/CD input selector.
To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and “HDMI
Control” is set to “On” ( 33).
Connecting Components with HDMI
Jack Signal Components Assignable
Input HDMI IN1 Audio/Video Blu-ray Disc/DVD player
HDMI IN2 Satellite, cable, set-top box, etc.
HDMI IN3 Game console
Output HDMI OUT TV, projector, etc.
Game console
TV, projector, etc.
Satellite, cable, set-top box, etc. Blu-ray Disc/DVD player

Table of Contents

Other manuals for Onkyo HT-R380

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-R380 and is the answer not in the manual?

Onkyo HT-R380 Specifications

General IconGeneral
Channels5.1
HDMI Inputs4
HDMI Outputs1
Weight17.6 lbs
Response Bandwidth10 Hz - 100 kHz
THD0.08%
Input Impedance47 kOhm
Input Sensitivity200 mV
Tuner BandsAM/FM
Surround System Class5.1 channel
Digital Sound Processor (DSP)Yes
HDMI SwitchingYes
BluetoothNo
HDMI Version1.4a
Power Output100W per channel (6 ohms, 1 kHz, 1% THD, 1 channel driven)
Dolby TechnologiesDolby Digital, Dolby Digital Plus, Dolby TrueHD
DTS TechnologiesDTS, DTS-HD Master Audio
DSP PresetsGame, Movie, Music
Input Video FormatsHDMI
Audio D/A Converter24bit / 192kHz
InputsHDMI, Composite, Optical, Coaxial
OutputsHDMI, Composite

Related product manuals