EasyManuals Logo

Onkyo HT-R380 Instruction Manual

Onkyo HT-R380
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
En
Connecting the AV Receiver
Speaker Configuration
The following table indicates the channels you should use
depending on the number of speakers that you have.
For 5.1-channel surround-sound playback, you need five
speakers and a subwoofer.
No matter how many speakers you use, a subwoofer is rec-
ommended for a really powerful and solid bass.
To get the best from your surround sound system, you
need to set the speaker settings. You can do this manually
( 30).
Connecting the Speaker Cables
The AV receiver’s positive (+) speaker terminals are color-
coded for ease of identification. (The negative (–) speaker
terminals are all black.)
Speaker Connection Precautions
Read the following before connecting your speakers:
You can connect speakers with an impedance of between
6 and 16 ohms. If you use speakers with a lower imped-
ance, and use the amplifier at high volume levels for a
long period of time, the built-in amp protection circuit
may be activated.
Disconnect the power cord from the wall outlet before
making any connections.
Read the instructions supplied with your speakers.
Pay close attention to speaker wiring polarity. In other
words, connect positive (+) terminals only to positive (+)
terminals, and negative (–) terminals only to negative (–)
terminals. If you get them the wrong way around, the
sound will be out of phase and will sound unnatural.
Unnecessarily long, or very thin speaker cables may
affect the sound quality and should be avoided.
Be careful not to short the positive and negative wires.
Doing so may damage the AV receiver.
Make sure the metal core of the wire does not have con-
tact with the AV receiver’s rear panel. Doing so may
damage the AV receiver.
Don’t connect more than one cable to each speaker ter-
minal. Doing so may damage the AV receiver.
Don’t connect one speaker to several terminals.
Connecting Your Speakers
Number of channels 2345
Front speakers ✔✔✔✔
Center speaker ✔✔
Surround speakers ✔✔
Speaker Color
Front left White
Front right Red
Center Green
Surround left Blue
Surround right Gray
Subwoofer Purple

Table of Contents

Other manuals for Onkyo HT-R380

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-R380 and is the answer not in the manual?

Onkyo HT-R380 Specifications

General IconGeneral
Channels5.1
HDMI Inputs4
HDMI Outputs1
Weight17.6 lbs
Response Bandwidth10 Hz - 100 kHz
THD0.08%
Input Impedance47 kOhm
Input Sensitivity200 mV
Tuner BandsAM/FM
Surround System Class5.1 channel
Digital Sound Processor (DSP)Yes
HDMI SwitchingYes
BluetoothNo
HDMI Version1.4a
Power Output100W per channel (6 ohms, 1 kHz, 1% THD, 1 channel driven)
Dolby TechnologiesDolby Digital, Dolby Digital Plus, Dolby TrueHD
DTS TechnologiesDTS, DTS-HD Master Audio
DSP PresetsGame, Movie, Music
Input Video FormatsHDMI
Audio D/A Converter24bit / 192kHz
InputsHDMI, Composite, Optical, Coaxial
OutputsHDMI, Composite

Related product manuals