Onkyo HT-R380 - SCHEMATIC DIAGRAMS-7 Video Section; Video PC Board Schematics (BAVD-0375;0389)

18
En
Turning On/Off the AV Receiver
Turning On
Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by ON/STANDBY on the remote controller.
The AV receiver comes on, the display lights, and the STANDBY indicator goes off.
Turning Off
Press ON/STANDBY on the front panel or the remote controller.
The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
ON/STANDBY
ON/STANDBY
RECEIVER
STANDBY indicator
Front panel Remote controller