Onkyo TX-SR3100

56
Setup
1. Input/Output Assign
 OSD Language (Default Value: English)
Select the on-screen display language from the following.
(North American models)
English, German, French, Spanish, Italian, Dutch, Swedish
(European, Taiwanese, Middle East, Australian and Asian models)
English, German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese
 Impose OSD (Default Value: On)
Set whether or not to display information such as volume adjustment or
switching of input on the TV screen.
On OSD is displayed on the TV
• OSD may not be displayed depending on the input signal
even if "On" is selected. In this case, change the resolution
of the connected device.
• When Dolby Vision signals are input, the volume bar
changes from blue to magenta.
O󰀨 OSD is not displayed on the TV
 Mini Player OSD (Default Value: Always On)
You can display on the TV the images from another input selected last
while playing the audio from BLUETOOTH input. After switching the input to
BLUETOOTH, play the images and audio. And then when you press MODE
on the remote controller, the image is displayed in full-screen mode, and the
audio information (Mini Player) for BLUETOOTH is displayed in the corner of the
screen. You can set whether to always display this Mini Player on the screen.
• Each time the MODE button is pressed, the image display/non-display can be
switched.
• This setting cannot be selected if "Impose OSD" is set to "O󰀨".
• This function cannot be used when "OSD Language" is set to Chinese.
(European, Taiwanese, Middle East, Australian and Asian models)
Always On The Mini Player is always displayed.
Auto O󰀨 The Mini Player turns o󰀨 automatically in 30 seconds after
displayed. If operation such as changing the volume is
performed, it is displayed again for 30 seconds.
 Screen Saver (Default Value: 3 minutes)
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10 minutes" and "O󰀨".