The status indicator illuminates blue
indicating that programmable charging is
active.
Charging ð page 106
Charging status ð page 114
CHARGING STATUS
If the vehicle is plugged in and the
ignition is switched off, the charging
status indicator indicates the following:
● Illuminates white: welcome lighting
when charging port flap is opened
●
Illuminates green: charging complete
●
Flashes green: charging in process
●
Illuminates blue: programmable
charging active
●
Illuminates red: malfunction
A malfunction may be caused by the
vehicle or the electrical installation at the
customer's site.
Further charging status indicators are
located on the control box of the basic
domestic cable (mode 2) / enhanced
domestic cable (mode 2).
Charging cable ð page 108
Programmable charging ð page 113
Fuel
When releasing the brake pedal after
stopping on an incline and certain slope
conditions are met, brakes remain on for
further two seconds.
The brakes release automatically as
soon as the vehicle begins to accelerate.
Only use unleaded fuel that complies
with European standard EN 228 or E DIN
51626-1 or equivalent.
The engine is capable of running with
fuel that contains up to 10% ethanol (e.g.
named E10).
Use fuel with the recommended octane
rating. A lower octane rating can reduce
engine power and torque and slightly
increases fuel consumption.
Note
The only petrol additives authorized
for are those that meet the B715001
standard.
Caution
Do not use fuel or fuel additives that
contain metallic compounds such as
manganese-based additives. This may
cause engine damage.
Caution
Use of fuel with a lower octane rating
than the lowest possible rating could
lead to uncontrolled combustion and
engine damage.
The engine specific requirements
regarding octane rating are given in the
engine data overview ð page 174. A
114 Driving and operating
To Next Page
Loading...
