If service is required in less than 1000
km, indicator flashes and then illuminates
permanently. The remaining distance or
time duration is indicated for several
seconds.
Overdued service is indicated by a
message in the cluster which indicates
the overdued distance. The indicator
flashes and then illuminates permanently
until service is executed.
Reset of service interval
After each service, the service indicator
must be reset to ensure proper
functionality. It is recommended to seek
the assistance of a workshop.
Operate as following:
● Switch off the ignition.
● Press the end of the right stalk to
access menu.
● Scroll through the pages using the
steering wheel toggle up and down.
● Once the desired menu has been
reached, press and hold the button to
reset
● When the display indicates "0",
release the button. The indicator then
disappears.
Retrieving service information
To retrieve the status of the service
information at any time:
● Press the end of the right stalk to
access the menu.
● Scroll through the pages using the
steering wheel toggle up and down.
● Short press on the toggle when in the
service menu.
The service information is displayed for a
few seconds.
Service information ð page 170.
Inductive charging
Warning
Inductive charging can affect the
operation of implanted pacemakers or
other medical devices. If applicable,
seek medical advice before using the
inductive charging device.
Warning
Remove any metal objects from the
charging device before charging a
mobile device, as these objects could
become very hot.
This system allows wireless charging of
a mobile device such as a smartphone,
using the magnetic induction principle, in
accordance with the Qi.
The mobile device to be charged must be
compatible with the Qi standard, either by
design or by using a compatible holder or
shell.
To charge a mobile device:
1. Remove all objects from the charging
device.
2. Place the mobile device on the
charging area. Note that the mobile
Dashboard Instruments And Controls 57
To Next Page
Loading...
