AUTOMATIC LIGHT CONTROL
When the automatic light control function
is switched on, the system switches
between daytime running lights and
headlights automatically depending on
the external lighting conditions and
information given by the wiper system.
Automatic headlight activation
Turn the switch in position: AUTO
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched on
if the windscreen wipers have been
activated for several wipes.
H
IGH BEAM
To activate or deactivate the high beam,
pull the lever two times.
HIGH BEAM ASSIST
The system switches from low beam to
high beam and vice versa to prevent
glaring. Once activated, high beam assist
remains active and switches high beam
on and off depending on surrounding
conditions. The latest setting of the high
beam assist will remain set after the
ignition is switched on again.
Activation
Depending on version: The high beam
assist can be activated via the vehicle
settings menu on the cluster.
High beam is switched on automatically
in dark surroundings at a speed above
45 km/h. High beam is switched off at
a speed below 35 km/h, but high beam
assist remains active.
The green control indicator
illuminates continuously when the high
beam assist is activated, the blue
illuminates when high beam is on.
Deactivation
Depending on version: The system can
be deactivated via the vehicle settings
menu on the cluster.
Vehicle customization ð page 61
HEADLIGHT RANGE ADJUSTMENT
Lighting 81
To Next Page
Loading...
