30103AC 17
Changing the Network Type
You can change the network type from Static IP to DHCP easily from the list of connected
IP devices. To change the network type to DCHP:
1. On the list of connected IP devices locate the desired camera and record the MAC
address,
2. Right-click the camera row and select Network Setup.
3. Select the DCHP option on the Network Setup window and then click Apply.
4. Click OK to acknowledge the change.
5. After one minute, click Device Search to search for all connected IP devices.
6. Locate the camera using the MAC address recorded earlier and double click the
camera row.
7. Type the Username and Password to access the camera.
To Next Page
Loading...
