OPTIKON ASSISTANT - System Upgrade and Calibration Procedures; Step 1: Register Flow Max Value

Assistant Service Manual
OPTIKON 2000
Code 121008S
10-1 Rev. D
10. SYSTEM UPGRADE AND CALIBRATION
10.1 STEP 1 - REGISTER “FLOW MAX” VALUE
Enter the System Calibration Software:
• Enter Program mode
• Select Save as
• Type in Quit Phaco <enter>
Fig.7
The unit will exit the normal working mode and it will show the Windows CE
desktop.
• Double click on the “Calibrations” icon on the desktop (fig.8).