DV11 / DVD100 / U2 / U3
6-1
Chapter 6
EDID Upgrade
6-1 EDID Introduction
information about a display device and its capabilities, including vendor information,
and character strings for the monitor name and serial number.
The information is stored in the display and is used to communicate with the system
through a Display Data Channel (DDC), which sites between the display device and the
monitor and system can work together.
Note: - If a display device has digital input ports, like DVI or HDMI, but without EDID in its main
board, the display device will show no image while the input source is digital signal.
- The EDID Upgrade procedure for DVD100 / U2 / U3 is the same as DV11, we take
DV11 for example here.
To Next Page
Loading...
