Optoma EP783 - Disassemble Top Shielding; Disassemble Main Board Module

EP783/EP783S/EP783L/OPX5000/TX783L/TX783S
Condential 2-7
2-10 Disassemble Top
Shielding
1. Unscrew 9 screws (as red circle) to
disassemble Top Shielding.
2. Push the Top Shielding (as red arrow)
and pull it up.
Note: There are 2 tenons (as yellow square)
on it.
2-11 Disassemble Main
Board Module
1. Use Tweezers to take off black tape (as
orange square).
2. Unplug 13 connectors (as yellow square).
3. Unscrew 8 screws (as red circle).
4. Unplug 1 FPC cable (as blue square).
5. Take off the Main Board module.
Note: - Make sure cables plug into the correct
ports when assembling the unit.