Optoma EP783 - Setup Procedure (VGA-1& DVI-D Port)

EP783/EP783S/EP783L/OPX5000/TX783L/TX783S
Condential
6-3
6-4 EDID Key-In Procedure
(VGA-1 & DVI-D Interface)
1. Click on "EDID" to execute EDID program
2. Choose model
- In the port selection bar, please choose the
port that you use. Example: if you use "COM2",
choose COM2 in the port selection.
- Click "Model."
- Choose the EDID that responses to the model
that you choose.
6-3 Setup Procedure (VGA-1
& DVI-D Port)
1. Connect all ports
- Power adapter to xture JP1
- Fixture P1 to PC COM2 Port
- Fixture P4 to Projector VGA-1 port
- Fixture P3 to Projector DVI-D port
- Power on xture
P3
P4
VGA Cable
RS232 Cable
JP1
P4
P1
Adapter
P3
DVI Cable