Need help?Do you have a question about the Optoma L1 and is the answer not in the manual?
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | 0.47 - 0.74 m |
| Vertical scan range | 50 - 240 Hz |
| Projection technology | DLP |
| Contrast ratio (typical) | 1800000:1 |
| Screen size compatibility | 75 - 120 \ |
| Projector native resolution | 2160p (3840x2160) |
| Keystone correction, horizontal | 10 ° |
| Projector brightness (economic mode) | 1050 ANSI lumens |
| Lamps quantity | 1 lamp(s) |
| Light source type | LED |
| Service life of light source | 30000 h |
| Focus | Auto/Manual |
| Offset | 126 % |
| Throw ratio | 0.25:1 |
| Fixed focal length | 2.63 mm |
| Analog signal format system | - |
| DVI port | No |
| Audio (L/R) out | 1 |
| HDMI connector type | Full-size |
| HDMI ports quantity | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 0 |
| Noise level | 28 dB |
| Preset modes | Game |
| Number of OSD languages | 25 |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, TUR, VIE |
| RMS rated power | 20 W |
| Number of built-in speakers | 2 |
| Placement | Desktop |
| Product type | Ultra short throw projector |
| Product color | Black |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100-240 V |
| AC input frequency | 50-60 Hz |
| Power consumption (max) | 165 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 98 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
Weight and Dimensions| Depth | 316 mm |
|---|---|
| Width | 400 mm |
| Height | 102.3 mm |
| Weight | 5100 g |
| Package weight | 7800 g |
Crucial instructions for safe operation and preventing hazards.
Identification and function of projector buttons and status LEDs.
Instructions and diagrams for projector placement options (table/ceiling, front/rear).
How to adjust projector height using elevator feet.
Steps to adjust image focus using the remote control or menu.
Process of powering on the projector and initial setup prompts.
Steps to turn off the projector and confirmation message.
Overview of OSD menu structure and navigation steps.
Sub-menus for image settings like Picture Mode, Dynamic Range, Brightness, etc.
Selecting aspect ratio and configuring gaming features.
Managing input sources, HDMI CEC, and resetting input settings.
Description of predefined picture modes (Vivid, HDR/HLG, Cinema, Game, Reference, Bright, 3D, Reset).
Adjusting contrast, sharpness, and gamma curve for image optimization.
Adjusting color balance, tint, temperature, hue, saturation, and color space.
Settings for enabling and configuring 3D viewing modes and sync.
Configuring power management features like Direct Power On and Auto Power Off.
Setting up password protection and usage timers.
Solutions for common image issues like no image, out of focus, or stretched image.
Specifications for technology, resolution, lens, and I/Os.
Specifications for power consumption, dimensions, weight, and operating environment.
To Next Page
