Optoma L1 - Specifications; Optical and Input;Output Specs; Power, Dimensions, and Environment

English
55
ADDITIONAL INFORMATION
Specications
Optical Description
Technology Texas Instrument DMD, 0.47” 4K UHD DMD x1 with 4-Way XPR actuator
Output resolution 4K UHD 3840 x 2160
Maximum input
resolution
Graphic up to 3840 x 2160 @60Hz
Maximum Bandwidth:
 HDMI 2.0: 600MHz
Lens
 Throw ratio: 0.254
 F-stop: 2.04
 Focal length: 2.63mm
O󰀨set 126% ±5%
Image size 75” ~ 120”
Projection distance 14.5cm ±2cm at 75” to 39.8cm ± 3cm at 120” (28.6cm ±2.5cm at 100”)
I/Os
 HDMI 2.0 x3 (outside x2 ; inside x1 for Android TV dongle)
 USB x2 (outside x1, type-A connector for power delivery 5V/1.5A and service;
inside x1, micro USB connector as a power supply 5V/1.5A for Android TV dongle)
 Audio Out 3.5mm
 S/PDIF
Colour 1073.4 Million color
Scan rate
 Horizontal scan rate: 15 ~ 140 KHz
 Vertical scan rate: 24 ~ 120Hz and 240Hz for 1080P
Speaker 10W x2
Power consumption
 Maximum: (Bright mode)
 165W (typical), 190W(max) @110VAC
 160W (typical), 184W(max) @220VAC
 Minimum: (ECO mode)
 145W (typical), 167W(max) @110VAC
 143W (typical), 164W(max) @220VAC
Power requirement 100~240V ±10%, AC 50/60Hz
Input current 2.2A
Installation orientations Front, Rear, Ceiling-top, Rear-top
Dimensions
(W x D x H)
 Without feet: 400 x 316 x 102.3 mm (15.7 x 12.4 x 4.0 inches)
 With feet: 400 x 316 x 113.3 mm (15.7 x 12.4 x 4.5 inches)
Weight 5.1 kg (11.24 lbs)
Environmental Operating in 0~40°C, 10%~85% humidity (non-condensing)
Note: All specications are subject to change without notice.