EasyManuals Logo

Optoma L1 User Manual

Optoma L1
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
English
52
ADDITIONAL INFORMATION
Troubleshooting
If you experience a problem with your projector, please refer to the following information. If a problem persists,
please contact your local reseller or service center.
Image problems
No image appears on-screen
Ensure all the cables and power connections are correctly and securely connected as described in the
"Setup and Installation" section.
Ensure the pins of connectors are not crooked or broken.
Ensure that the "Mute" feature is not turned on.
Image is out of focus
Please refer to “Focus” on page 22.
Make sure the projection screen is between the required distance from the projector.
(Please refer to page 49).
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format
on projector side.
If you play the LBX format DVD title, please change the format as V-Stretch in projector OSD.
If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD.
Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
Move the projector closer to or further from the screen.
Press "Menu" on the projector panel, go to "Display-->Aspect Ratio". Try the di󰀨erent settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the screen and below the bottom of the
screen.
Image is reversed
Select "Setup-->Projection Orientation" from the OSD and adjust the projection direction.
Blurry double image
Make sure “Picture Mode” is not 3D to avoid normal 2D image appear blurry double image.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Optoma L1 and is the answer not in the manual?

Optoma L1 Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance0.47 - 0.74 m
Vertical scan range50 - 240 Hz
Projection technologyDLP
Contrast ratio (typical)1800000:1
Screen size compatibility75 - 120 \
Projector native resolution2160p (3840x2160)
Keystone correction, horizontal10 °
Projector brightness (economic mode)1050 ANSI lumens
Lamps quantity1 lamp(s)
Light source typeLED
Service life of light source30000 h
FocusAuto/Manual
Offset126 %
Throw ratio0.25:1
Fixed focal length2.63 mm
Analog signal format system-
DVI portNo
Audio (L/R) out1
HDMI connector typeFull-size
HDMI ports quantity3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity0
Noise level28 dB
Preset modesGame
Number of OSD languages25
On Screen Display (OSD) languagesARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, NOR, POL, POR, RUM, RUS, SWE, TUR, VIE
RMS rated power20 W
Number of built-in speakers2
PlacementDesktop
Product typeUltra short throw projector
Product colorBlack
Market positioningHome cinema
Cable lock slot typeKensington
Power sourceAC
AC input voltage100-240 V
AC input frequency50-60 Hz
Power consumption (max)165 W
Power consumption (standby)0.5 W
Power consumption (typical)98 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth316 mm
Width400 mm
Height102.3 mm
Weight5100 g
Package weight7800 g

Related product manuals