Optoma PS200 - Table 2: Front Panel Button Overview

© Optoma
Issue 2.1 July 25, 2018
20
Table 2: Front Panel Button Overview
Model
PS200
LS200
PS200T
LS200T
PS300T
LS300T
2x 3G-SDI/HD
via BNC
  
Display Port
via DP connector
  
2x HDMI (UHD,4K)
via HDMI connector
  
1x Streaming (IP) Video
  
HDBaseT
via RJ45 connector
 
DVI & analogue (RGB/
RGB/YPbPr)
via DVI-U
  
VGA analogue via 15HDD
  
Composite Video
via BNC
  
HDMI (HD)
Via HDMI connector
  
Dedicated Genlock

Front Panel Shortcuts:
Lock & Unlock front panel Keypad: Esc + Menu/Sel
Perform Factory reset: Esc + YPbPr
Set output mode to 1280x720p 60Hz: Esc + VGA
Display current firmware version: Esc+ Standby (to exit, press the menu button)