Optoma PS200 - Brightness (Black-Level); Contrast; Saturation; Hue

© Optoma
Issue 2.1 July 25, 2018
70
6.4.2.9.2 Brightness (Black-Level)
Brightness controls the offset applied to the video signal. (same as the brightness control on a TV)
Settings: -50 to 50 in steps of 1
Default: 0
6.4.2.9.3 Contrast
Contrast controls the gain applied to the video signal.
Settings: -50 to 50 in steps of 1
Default: 0
6.4.2.9.4 Saturation
Controls the video colour saturation, (applies individually to all video inputs but not computer input
signals or formats).
Settings: -50 to 50 in steps of 1
Default: 0
6.4.2.9.5 Hue
Adjusts the colour hue of NTSC signals. This is not applicable for computer input signals or formats.
Settings: -50 to 50 in steps of 1
Default: 0