Optoma PS200 - Input; Input Selection

© Optoma
Issue 2.1 July 25, 2018
33
6.1 Input
This menu contains adjustments related with the outputs of the unit.
6.1.1 Input Selection
This menu provides an additional method of selecting the desired input.
Depending on the specific model, some of these input selections may not be available.
Test patterns can be selected even when there are no inputs connected to the unit. Different test
patterns can be selected by scrolling the jog wheel.
Settings:
 SDI-1*
 SDI-2*
 Display Port
 HDMI-1
 HDMI-2
 HDBaseT*
 DVI
 HDMI-3
 VGA
 YPbPr/RGB
 Composite Video
 Test Pattern
Default: HDMI-1
* These inputs are not present on all the models. Please refer to the Input Connector Overview to
determine the appropriate models.