Oracle MICROS Express Station 4 Series User Manual

Testing the Fingerprint Reader
The Fingerprint Reader screen lets you test the fingerprint reader’s ability to scan a
fingerprint and validate the fingerprint read accuracy.
1. On the diagnostic main screen, scroll down in the list of devices, and then tap
Fingerprint Reader.
2. On the Fingerprint Reader screen, tap Refresh.
3. Tap the drop-down list and select your device.
4. Tap Initialize. The screen should show Device Ready.
5. Tap Start Verification, and then place a finger on the reader and follow the on-
screen prompts.
Multimedia IO (MMIO)
The Multimedia IO (MMIO) screen lets you configure features of the optional
Multimedia Input/Output accessory.
Saving Configuration Data
The Dump Configuration Data screen exports the current workstation configuration to
C:\ConfigDump.txt
Chapter 8
Testing the Fingerprint Reader
8-4

Oracle MICROS Express Station 4 Series Specifications

General

Brand	Oracle
Model	MICROS Express Station 4 Series
Category	Touch terminals
Language	English